d a t a s h e e t : c l d - c t 1 1 6 . 0 0 0 cree ? p4 led model # lp377ppg-60g-03 data sheet 60-degree, 7.6 x 7.6 led lamp in pure-green color with water-transparent lens and stopper applications advertising signs indicators message boards absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit forward current i f 30 ma peak forward current note i fp 100 ma reverse voltage v r 5 v power dissipation p d 132 mw operation temperature t opr -40 ~ +95 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max. 260c for 3 sec. max. (3 mm from the base of the epoxy bulb) note: pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics symbol condition unit minimum typical maximum forward voltage v f i f = 30 ma v 3.6 4.4 reverse current i r v r = 5 v a 100 dominant wavelength d i f = 30 ma nm 515 527 535 luminous flux v i f = 30 ma mlm 1500 2500 50% power angle 2? i f = 30 ma deg 60 ? ? ? subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct6.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lp377ppg-60g-03 (i f = 30 ma) lamps are sorted to luminous fux ( v ), v f and dominant wavelength ( d ) bins shown. orders for LP377PPG1-60G-03 may be flled with any or all bins contained as below. all luminous fux ( v ) , v f and dominant wavelength ( d ) values shown and specifed are at i f = 30 ma. x6 x7 x8 x9 j or above h g f rank f g h luminous flux 1500-2400 mlm 2000-3000 mlm 2500-3600 mlm rank v7 v8 v9 v10 v11 v12 v13 v14 voltage 2.8-3.0 v 3.0-3.2 v 3.2-3.4 v 3.4-3.6 v 3.6-3.8 v 3.8-4.0 v 4.0-4.2 v 4.2-4.4 v important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. no tolerance in the measurement of luminous fux. tolerance of measurement of dominant wavelength is 1 nm. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. 520 nm 525 nm 530 nm 535 nm 515 nm dominant wavelength ( d ) luminous flux ( v )
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cld-ct6.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 4/4 format #: cotco-d-074 rev.4 document no. spe/ lp377pbl1-60g-03 rev. no. 02 g g r r a a p p h h s s ta( c) 0 ambient temperature (tjmax=120 c) 0 20 40 60 80 120100 10 20 30 50 40 if(ma) 80.0 4.6 0.5 0.0 forward current 0.0 40.0 20.0 60.0 forward voltage. 1.0 1.5 2.0 2.5 3.0 0.0 20.0 60.0 40.0 80.0 3.8 3.4 4.2 100.0 if (ma) 100.0 if(ma) wl(nm) vf(v) 5.0 fig.1 forward current vs. 25% wavelength. 0% 300 400 wl(nm) 600 500 700 domi wl= 470nm reverse voltage. fig.2 reverse current vs. 50% 75% 100% -20.0 -10.0 -40.0 -30.0 -50.0 ir(ua) -50 vr(v) -40 0.0 -30 -20 -10 0 fig.3 relative luminous flux vs. half power wl=28nm fig.5 maximum forward dc current vs fig.4 relative luminous flux vs. -90 fig.6 far field pattern -60 -30 0 30 50% power angle : 60 0 90 60 0% 20%20% 40%40% 60%60% ie(%) 80%80% 100%100% items signatures date revision history prepared by liuzm 2005-07-07 rev. no date change description checked by aldosin 2005-07-07 02 2005-07-07 release. - add b rank. v approved by david 2005-07-07 fcn# fcn20050221 data is subject to change without prior notice; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 4 cld-ct6.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. 2/4 format #: cotco-d-074 rev.4 document no. spe/ lp377pbl1-60g-03 rev. no. 02 a a p p p p l l i i c c a a t t i i o o n n s s : : d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - advertising signs - indicators - message board a a b b s s o o l l u u t t e e m m a a x x i i m m u u m m r r a a t t i i n n g g s s a a t t t t a a = = 2 2 5 5 c items symbol absolute maximum rating unit forward current i f 30 ma peak forward current* i fp 100 ma reverse voltage v r 5 v power dissipation p d 132 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max.260 c for 3 sec max. (3mm from the base of the epoxy bulb) *pulse width <=0.1msec duty <=1/10 t t y y p p i i c c a a l l e e l l e e c c t t r r i i c c a a l l & & o o p p t t i i c c a a l l c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s ( ( t t a a = = 2 2 5 5 c ) ) items symbol condition min. typ. max. unit forward voltage v f i f = 30ma --- 3.6 4.4 v reverse current i r v r = 5v --- --- 100 p a dominant wavelength o d i f = 30ma 462 470 475 nm luminous flux - v i f = 30ma 250 850 --- mlm 50% power angle 2 t ? i f = 30ma --- 60 --- deg
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct6.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LP377PPG1-60G-03-00001 p4 60 pure green 527nm, full rank, tube pack * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tube pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
